|
|
|
The products on
this page were designed more for you than for your vehicle. If
you drive a Rover then you appreciate the fact that sometimes a
shovel is more useful than a spare tire. Or perhaps with gas
pricing rising as they are, a siphon is more useful than a tire
tool. :) Everyone reacts differently when recovering their
vehicle from a potentially dangerous situation. When shopping
for expeditionary accessories, think about what tool you will be
most effective with in a recovery situation.
If you like mud,
get a shovel. If you like sand, you might need a sand ladder. If
you like open spaces, check out the pull-pal. If your truck’s a heep, just leave it stuck. |
|
Hi-Lift Carrier Adaptor Plate |
|
|
Your High-Lift jack is
long and heavy, awkward to store and easy to drop on someone’s head,
foot, (insert appendage here), or whatever. If fact the only thing about
the High-Lift jack that everyone hates, is its size.
The engineers at Equipe
4x4 have designed a High-Lift specialty mount that stores the High-Lift
in virtually the only place where it can be easily accessible and not in
your way: centered over your rear-door spare tire.
As you can see in our
pictures, the High-Lift Carrier mount is sturdy and reflects the same
sexy craftsmanship seen in all of their exclusive Land Rover
accessories. The Equipe craftsmanship is immaculate. From the sleek
welding to the high-grade materials they use, Equipe builds a fine
product.
Stop fabricating flimsy
High-Lift mounts at home. It’s dangerous. We know. God we know….
|
|
|
Item # |
Product Description |
Price |
|
D02-PB0035 |
Hi-Lift
Carrier Adaptor Plate |
$69.95 |
|
[
Back to
top ]
|
Sand
Tracks |
|
When the going gets tough and there is no
traction to be found, Mantec Sand Ladders can
help you out. These aluminum Sand Ladders are
designed to be put under the wheels of a stuck
vehicle; the large size of the ladders allows
the weight of the vehicle to be distributed over
a larger area of ground, effectively increasing
the vehicles contact patch. While at the same
time the textured aluminum gives the tires a
much needed grip in low traction surfaces such
as mud.
The light weight aluminum design of the Mantec
Sand Ladders are perfect for those who need to
keep their vehicles roof weight at a minimum.
Made of heavy duty aluminum, these sand ladders
have a much lighter weight than their galvanized
steel counterparts. Mantec Sand Ladders have the
additional advantage of having smooth edges
(versus the large serrations on the metal sand
ladders) which allows them to be handled without
heavy work gloves like PSP.
Note: Mantec Sand Ladders are not to be used for
bridging purposes.
|
|
|
Item # |
Product
Description |
Price |
|
P02-218 |
Sand
Tracks |
$299.95 |
|
[
Back to
top ]
|
The Super Siphon – The Safe & Easy Way To Tranfer Fluids |
|
|
The Super Siphon
is a one of a kind product, made of a 6’ long ½” thick tube that
flows 3.5 gallons of liquid per minute as self priming design
eliminates the need to taste liquids such as fuel while trying to
siphon. The Super Sipon makes a wonderful addition to our Sceptre
Jerrycans, just keep the cans mounted, insert the Super Siphon into
the fuel and gas tank and start siphoning!
The design of
the Super Siphon is simple, there is a glass ball contained inside
the brass housing on the input end of the siphon. When the input
end of the siphon is pushed into liquid, the glass ball is displaced
and liquid is forced into the siphon. When the siphon is pulled, the
glass ball fights tightly against the mouth of the brass housing and
prevents the captured liquid from pouring out of the input end. A
few pumps of the input end will fill the siphon with enough liquid
to permit gravity to pull out the rest of the liquid. Siphoning will
continue as long as there is liquid to be siphoned and the input end
of the siphon remains submerged in the liquid. To stop siphoning,
simply pull the input end of the siphon from the liquid.
Detailed Usage Instructions
 |
|
|
Item # |
Product Description |
Price |
|
P02-204 |
Super Siphon |
$8.95 |
|
[
Back to
top ]
|
Pull Pal |
|
The Pull-Pal, a well-engineered
anchoring tool, is both portable and well-suited for a wide range of
environments. Intended as a tool for winching through sand and mud,
Pull-Pal's design relies on useful rules of physics. Its hefty plow
blade sets firmly and safely into sand, clay, mud hardpan soil and
snow.
Pull-Pal gets you up and over hill
stalls and minimizes dangerous situations. It allows you more
control -- even when you are alone. Saves time, transmissions, and
tires.
Pull-Pal is designed for
winch-equipped off-road vehicles and is also ideal for construction
surveyors, search and rescue, utility, police, and rural maintenance
vehicles.
Pull-Pal folds compactly to the size
of an ordinary bumper jack for easy storage. It can be mounted
inside or outside or stored in an inexpensive gun case.
Pull-Pal is ruggedly constructed with
a forged chrome-moly plow assembly, welded construction overall, and
assembled with Grade 8 bolts for strength and quality.
Pull-Pal gets your rig out...fast.
Simply insert the plow point into the soil. As the winch cable
tightens, the point embeds itself deeply and firmly into the ground
and frees your rig with the assistance of the wheels in motion.
The RW 11,000 size unit, weighs only
38 lbs, and is recommended for all vehicles. The Pull-Pal comes with
a detachable spade and folds to the size of an ordinary bumper jack
[45”] for easy storage. Designed to work in most types of ground
(including sand, hard-pan soil and even snow.) It can be used to
extract your vehicle as well as an anchoring point from the rear
when winching another vehicle out.
The RW 14,000 unit is 12lbs heavier
than the 11,000 unit but is the same size [45”]. It is designed for
larger vehicles like H1’s, Unimogs, Large Trucks, Etc.
The best winch is worthless without
something to hook onto! Only the Pull-Pal allows you to get the
maximum pull from your winch every time by allowing you to unspool
your winch cable to the proper layer that gives you maximum pull.
The Pull-Pal is a remote anchoring device that can be placed just
about anywhere. You lose considerable pulling power (up to 20% on
some units) with each layer of cable left spooled. So when you're
really stuck, and you need all the power you can get from your
winch, YOU NEED Pull-Pal! |
|
|
Pull
Pal 6,000 |
|
The smaller RW 6,000 is
for vehicles such as the smallest Samurai & ATV. This Pull-Pal folds
compactly to 32" for easy storage. It can be mounted in or outside. |
|
|
Item # |
Product
Description |
Price |
|
P03-6000 |
6000
Model Pull Pal |
$249.95 |
|
|
Pull
Pal
11,000 |
|
The RW 11,000
size unit, weighs only 36 lbs, and is recommended for all vehicles.
The Pull-Pal comes with a detachable spade and folds to the size of
an ordinary bumper jack for easy storage. Designed to work in most
types of ground (including sand, hard-pan soil and even snow.) It
can be used to extract your vehicle as well as an anchoring point
from the rear when winching another vehicle out. |
|
|
Item # |
Product
Description |
Price |
|
P03-11000 |
11,000
Model Pull Pal |
$289.95 |
|
|
Pull
Pal
14,000 |
|
Now even the full size rigs (Hummers, Unimogs, Large
Trucks, Etc.) will be virtually unstoppable with the addition of the
RW14000 to their accessory list.
-
45 lbs. FOLDED 45"
(9 lbs. HEAVIER THAN THE 11,000, but same length!)
-
SPADE - 24" HIGH x 14" WIDE
|
|
|
Item # |
Product
Description |
Price |
|
P03-14000 |
14,000
Model Pull Pal |
$500.00 |
|
[
Back to
top ]
|
Safety Seal Deluxe Tire Repair Kit |
|
|
|
Item # |
Product
Description |
Price |
|
P03-SSK101 |
Safety Seal Deluxe Tire Repair Kit |
$49.95 |
|
|
Safety Seal Off Road Kit |
|
|
|
Item # |
Product
Description |
Price |
|
P03-SSK102 |
Safety Seal Off Road Kit |
$39.95 |
|
|
Safety Seal Refills |
|
|
|
Item # |
Product
Description |
Price |
|
P03-SSK103 |
Tire Patch Replacement |
$21.95 |
|
|
P03-SSK104 |
Safety Seal Special Lube |
$4.95 |
|
[
Back to
top ]
|
The
Original Hi-Lift Jack & Accessories |
 |
|
The Hi-Lift Jack is a rugged, highly
versatile jack that puts you in command of situations requiring
lifting, pushing, pulling, winching, and clamping.
Although light in weight and easy to maneuver, the Hi-Lift Jack
offers a rated lifting capacity of 2 1/3 tons and can gety sticky situations. Use the jack to life you
when trying to become unstuck on rocks or other terrain,
use it as a emergency winch if your main winch fails it is one
of the must have tools for the avid off-roader.
Specifications:
-
Approximate weight: 30lbs
(14 kg)
-
4,660 lbs (2113.74 kg) rated
capacity
-
Climbing pins of specially
processed steel with 125,000 PSI tensile strength and
100,000 PSI yield.
-
Steel bar is manufactured of
specially rolled extra high carbon steel with 80,000 pound
minimum tensile & carbon .69 to .82.
-
Steel handle of 14gauge
high-yield structural tubing with minimum yield of 55,000
PSI. 1 5/16" diameter x 30" long.
-
42”, 48” and 60” models are
available
Features:
-
Every Jack comes complete with
an adjustable top clam clevis for use in clamping and winching.
-
Safety bolt is designed to shear at
7,000 lbs. (3175 kg)
-
For speedy disengaging, lifting
unity automatically drops away when load is removed.
-
4 1/2" (11cm) long lifting nose for
positive contact with load.
-
Steel bar can be reversed for extra
long life.
-
Low pickup of 4 1/2" (11cm).
-
28 square in base plate.
|
|
|
Item # |
Product
Description |
Price |
|
4WP-HL48 |
48”
Hi-Lift Jack, All Cast |
$70.00 |
|
|
4WP-HL60 |
60”
Hi-Lift Jack, All Cast |
$70.00 |
|
|
Hi-Lift
Lift Mate |
|
|
|
Item # |
Product
Description |
Price |
|
4WP-HLLM100 |
Lift
Mate 100 |
$30.00 |
|
|
Hi-Lift
Base Plate |
|
|
|
Item # |
Product
Description |
Price |
|
4WP-HLORB |
Hi-Lift Off-road
Base |
$35.00 |
|
|
Hi-Lift
Bumper
Lift |
|
If
your vehicle does not have any front or rear jacking points and you
have a factory bumper the bumper lift will hook on to it and allow
you to safely lift the vehicle without causing damage. |
|
|
Item # |
Product
Description |
Price |
|
4WP-HLBL250 |
Bumper
Lift |
$20.00 |
|
|
Hi-Lift
Winch Kit |
|
This kit will allow you to turn your Hi-Lift jack
into an emergency winch. It’s not the easiest
solution for winching but if your in a pinch it will
get the job done.
The kit includes:
-
Winch Tensioner
-
Custom Nose Attachment
-
8ft Tree Saver Strap
-
Pair of Hi-Lift Gloves
-
Hardware & Gear Bag
|
|
|
Item # |
Product
Description |
Price |
|
4WP-HLORK |
Hi-Lift Winch
Kit |
$50.00 |
|
|
ARB
Hi-Lift Attachment |
|
This
attachment is an ARB part which allows you to connect you Hi-Lift to
the front of your ARB bumper and safely lift the vehicle. In some
situations it is very easy to drop the vehicle with the way the ARB
bumper is design, this attachment alleviates this problem. |
|
|
Item # |
Product
Description |
Price |
|
A03-3500040 |
ARB
Hi-Lift Adaptor |
$39.95 |
|
[
Back to
top ]
|
Tuffy Security Products makes virtually indestructible
center consoles and storage solutions for 4x4 vehicles.
These center consoles and storage lockers provide the
ultimate in security for your stereo and your valuables
while in the city, on the trail or out on expedition. For
expedition use or everyday use, there simply isn't a safer
way to lock up your valuables inside your vehicle. |
|
Deluxe
Center Console |
 |
The
Tuffy Deluxe Center Console is a perfect storage device for Land Rover
Defender 90/110 owners. It features two separate lockable compartments, one
for a stereo or CB radio and a second larger rear storage space lined with a
rubber floor mat. Its 12.5" width will fit snugly between the front seats on
your Defender, while the durable powdercoating will last you for years to
come.
The Tuffy Deluxe Center Console includes remountable cupholders, a padded
arm rest and inside organization tray and grade 8 mounting hardware.
* Deluxe
Center Console shown at left in Gray (02) cupholders not shown.
|
|
|
Item # |
Product
Description |
Price |
|
P02-TUF017 |
Tuffy Deluxe Center
Console |
$284.95 |
|
|
Super
Security Storage Trunk |
 |
Made of heavy-duty 16-gauge steel, the Tuffy Super Security Storage Trunk is
ideal for the storage of large amounts of gear. Whether you are protecting
your gear from thieves or the elements, The Super Security Box is an
excellent solution.
While the Super
Security Trunk was designed to fit behind the rear seat of YJ, CJ-7, and
CJ-5. it fits perfectly mounted on the rear side rails of Defender 90s and
110s. The internal mounting system (drilling required) makes this box almost
impossible to remove without accessing the inside of the case. The 9 5/8"w x
33 7/8"l x 11 3/8"h dimensions of the box provide ample storage space for
all your gear.
*Super Security
Box shown at left in Black (01).
|
|
|
Item # |
Product
Description |
Price |
|
P02-TUF025 |
Tuffy Super
Security Box |
$249.95 |
|
01
Black |
02
Gray |
03
Charcoal |
04
Spice |
05
Camel |
 |
 |
| |
