Springs
	RTE springs offer variable or constant rates. Precision process by a US manufacturer. Strict manufacturing ensures; exact and consistent dimensions and heat treatment. All springs are shot peened for a clean smooth finish in grey powder coat. Scragged to insure repeat performance and consistency. If your Rover is roto-flex equipped we strongly recommend replacing it with a u-joint system.  This is found on most late model Discovery series Rovers.  We can provide the required parts used or new to complete this upgrade please email us for more information.
Item #	Product Description	Price
RT-RR1	300-340 lb/in Progressive, Rear Axel Set	$147.50
RT-RR2	189 lb/in Linear, Front Axel Set	$147.50
RT-RR3	285-325 lb/in, Rear Axel Set	$147.50
RT-RR4	225 lb/in Linear, Front Axel Set	$147.50
RT-RR4-1	225 lb/in Linear, Front Stock Height +1 For Winch Bumpers	$147.50
RT-L2	2” Lift For Above Spring Type	$0
RT-L3	3” Lift For Above Springs Type	$0
RT-RR4-5	250 lb/in Linear, Front Axel Set 5” Lift	$190.00
RT-RR1-5	330-360 lb/in Progressive, Rear 5” Lift Axel Set	$190.00

Spring Recommendations - Discovery I & II and Range Rovers
Description	Front Spring	Rear Spring
Daily driver, light offroading, minimal cargo loading	RR2	RR3
Daily driver, heavy offroading, large cargo loading	RR4	RR1

Spring Recommendations - Defender
Description	Front Spring	Rear Spring
Daily driver, light offroading, minimal cargo loading	RR2	RR3
Daily driver, heavy offroading, large cargo loading	RR4	RR3
Mainly offroad use	RR4	RR5

Shock Mounts
Loop to Loop Application Loop to Stem Application	Built to last and take heavy loads. Suitable for long travel shock applications. The lower mount can be mounted above or below existing axel shock mount Durable power coat finish. Grade 8 hardware included.
Item #	Product Description	Price
RT-RLTL	Rear Shock Mount Set Loop to Loop Shocks,	$220.00
RT-RLTS	Rear Shock Mount Set, Loop to Stem Shocks,	$155.00
RT-FLLM	Front Lower Loop Mount Adaptor	$CALL

Rear Links
RoverTym offers an easy bolt in rear drop cone which allows you rear spring to dislocate for extreme travel when utilizing a long travel shock such as an OME N76. The cones are constructed of a 3/8" base plate which bolts through the top of your rear spring mount to a 3/8" rectangular plate, the cone also incorporates a 1.4" stiffener plate and the actual radius is constructed of 1/8" material. Install Notes:  Rear spring must be removed in order to install drop cone. We find it easiest to install [if you do not have access to a lift] by removing the install side tire, lowering you brake rotor down to the ground atop a piece of 4x4 wood, remove your factory bump stop, utilize a small bottle jack to separate the body from the frame creating more than enough room to remove the spring and fit the cone.  Keep in mind if you bottle jack slips your body will go back to original distance from the frame VERY QUICKLY.  Red Rhino Products is not liable for any for damage to vehicle or persons during the installation of products.
Item #	Product Description	Price
RT-RDC	RoverTym Rear Drop Cone Set	$120.00

Front Correct HD Radius Arms
	RoverTym offers heavy-duty upgraded front radius arms for use with their suspension systems.  The arms can be used for stock height trucks or can be offset to compensate for up to 7" of lift. Your stock radius arms will be required as core or a charge of $200.00 will be applicable.  Arms that have been welded or previously worked on will not be accepted as a core.  Upon core return the charge will be refunded.
Item #	Product Description	Price
RT-FRA	RoverTym Front Radius Arms	$250.00
RT-FRA2	RoverTym Front Radius Arms +2"	$250.00
RT-FRA3	RoverTym Front Radius Arms +3"	$250.00
RT-FRA4+	RoverTym Front Radius Arms, 4"+	$Call
RT-FRAB	Genuine Bushings Installed	$50.00

Adjustable Pan Hard Rod
	The RoverTym adjustable pan hard rod is used to correct miss-alignment and alleviate bushing bi50 in the front axel.  Its use is recommended for anything over 2" of lift in order to achieve a stock ride. Your stock pan hard rod will be required as a core or a charge of $100.00 will be applicable.  Pan hard rods that are severely damaged or welded will not be acceptable as a core.  Upon core return the charge will be refunded.
Item #	Product Description	Price
RT-ADPH	RoverTym Adust. Pan Hard Rod	$150.00
RT-ADPHB	Genuine Bushing Installed	$10.00

Extreme Heim Jointed Rear Links
For the serious off-roader RoverTym offers Heim jointed rear links that offer the absolute maximum in articulation.  Built upon the proven RoverTym rear link design, these links offer a frame mount that is stout and distributes the load up and intro the frame via a box mount with outboard bearing design for the mounting bolt.  The box mount welds flush to the bottom and side of the frame doing away with the down hanging ear mount. The extended rear link offers more axle drop thru angular geometry and the heim joint freedom.  In order to use the heim jointed rear links you must use long travel shocks and rear drop cones. Installation Notes:  Cutting existing mounts and welding new heim mounts in required.
Item #	Product Description	Price
RT-RHLINK	RoverTym Rear Heim Links	$475.00

Rear Arm A Extension
	This extension is used when needing additional tire clearance at the rear door, or needing to rotate axle up to help in solving rear pinion angle problems. Bolts to A Arm and relocates existing rear swivel link to the rear up to 1" maximum. Also for 3" or more lifted trucks this link will restore some of the lost Rear A Arm swivel joint geometry which diminishes as we lift the suspension. Set back is to customer specs. This may require lenghtening rear links depending upon purpose used for. Moving rearward 1/2" results in a change in pinion angle of approx. 3 degrees.
Item #	Product Description	Price
RT-AARM	Made Custom, Please Call	$150.00

SLS Spacer Kits
Made specific for the SLS rear air bag, these spacers will lift and support the rear air bag using the same blade style mounts currently incorporated on the axle mount. Lifting the air bag a maximum of 2" this kit includs frame brackets to raise the frame attached air pressure lever to maintain normal levels of air pressure in the air bags.
Item #	Product Description	Price
RT-SLS	2” SLS Air Bag Spacer	$180.00

SLS Spacer Kits
Suspension Spacer kits feature stable bolt on lifting pads with recessed mounting and shouldered spring flanges for correct alignment and containment of springs under heavy articulated weight transfers. Front spacers offer standard through mounting for shocks or top of spacer mounting which is a built in drop kit. Made of aluminum alloy which provides a secure and stable lift system. Height of spacers to customer specs.
Item #	Product Description	Price
RT-2BSTEM	2” Lift Front w/ Stem Shock Mount	$165.00
RT-2BLOOP	2” Lift Front w/ Loop Shock Mounts	$180.00
RT-2SREAR	2” Lift Rear	$150.00

[ Back to top ]